Brandy distillation equipment has two different heating methods, one is to use electric heating boiler, the other is to use fire heating boiler. So, what is the difference between the two heating methods? What are the advantages and disadvantages of each?
The advantage of electric heating is that it looks easy to use and there is no exhaust emission. It is easy to use, that is, it can be used by plugging in the power supply, which is much more convenient than burning water. Moreover, burning a fire with coal or wood will produce smoke and dust, so there is no such worry when using electricity. However, the disadvantages of electric heating are also obvious.
First of all, it generally needs three-phase electricity, that is, industrial electricity, so as to ensure its heating speed. In this case, if you want to use the electric heating mode of brandy distillation equipment, you need to transform the whole line, which will involve relatively large transformation costs. At the same time, if such high power is used for a long time in densely populated areas, there is still a fire hazard, which needs special attention.
The problem of electricity, on the one hand, is the service life and maintenance of electric heating rods. Compared with the problems that the current equipment needs to face at the beginning of use, the service life and maintenance problems of electric heating rods are not easy to be found quickly, but this problem will be exposed after a period of use, ranging from half a month to half a month. Moreover, a layer of scale will condense on the surface of the electric heating rod of brandy distillation equipment during use, which will affect the heating effect. Once the electric heating rod is damaged, it needs to be replaced, which is a big problem for ordinary customers without maintenance experience. Ordinary customers are a little reluctant to replace the electric heating rod because they need to pay attention to sealing and insulation at the same time.
After a brief analysis of the electric heating mode of brandy distillation equipment, let's take a look at the heating mode with fire. There is no need to worry about modifying the circuit. It can be used after direct installation. However, it will produce exhaust gas and waste residue when burning firewood or coal, which will be limited if it is used in densely populated areas. At this time, anthracite or natural gas with higher cost can be considered to basically solve the problem of waste gas.
