① Introduction
Stainless steel brite tank with jacket
Bright beer tanks are often also called serving tanks, tax determination tanks or clear beer tanks(=CBTs), bright beer tanks(=BBTs) or maturation or conditioning tank. These tanks are used for the storage of the beer prior to being served or packaged. Depending on their application the beer serving tanks can be glycol jacked or can be located in a cold room. For brewpubs serving is often done by pumping or pressurizing the beer toward the serving location.
② Specification
Bright Tank Series | Volume by US (Gallon) | Diameter (mm) | Height (mm) | Inner tank thickness (mm) | Outer Shell (mm) | Insulation layer (mm) |
2HL Bright Tank | 53US Gallon | 820 | 1400mm | 3 | 2 | 50 |
3HL Bright Tank | 79US Gallon | 860mm | 1650mm | 3 | 2 | 50 |
6HL Bright Tank | 106US Gallon | 1060mm | 1900mm | 3 | 2 | 50 |
8HL Bright Tank | 132US Gallon | 1160mm | 2050mm | 3 | 2 | 50 |
10HL Bright Tank | 159US Gallon | 1260mm | 2100mm | 3 | 2 | 50 |
12HL Bright Tank | 211US Gallon | 1360mm | 2100mm | 3 | 2 | 50 |
15HL Bright Tank | 264US Gallon | 1360mm | 2400mm | 3 | 2 | 50 |
20H Bright Tank | 317US Gallon | 1560mm | 2350mm | 3 | 2 | 50 |
25HL Bright Tank | 396US Gallon | 1560mm | 2800mm | 3 | 2 | 50 |
30HL Bright Tank | 528US Gallon | 1760mm | 2700mm | 3 | 2 | 50 |
③ Advantage:
● Multi-functional: the fermenter can be used for fermentation, storage, blending and aging
● Big square door can easily fit the shape of rakes and shovels
● Each tank is finished with butt to butt TIG welding to ensure sanitary needs
● Optional CIP cleaning assembly
● Only premium quality stainless steel 304 or 316L are used for tank fabrication
④ Production
1. Welding: We abandoned the argon gas cylinder but adopt The Central System of Argon to make sure the TIG welding with pure argon gas shield. We also increase the using amount of gas when welding, so the quality of the welding line is more higher.
2.Dimpling: We adopt dimple plate rather than belt for glycol jacket, since it can increase the cooling area and improve the speed of cooling. The most important thing in brewing process is to avoid contaminating, that is to say the most important thing in producing beer equipment is to polish the inside tanks to 0.4~0.6 μm Without dead corner.
3.Polishing: We use large-scale polishing equipment to polish the inside of the tanks -- all over the wall to make sure there is no dead corner. And we adopted passivation and acid pickling which will make our tanks with higher accuracy. You need not worry about there will be some bacterias remained after cleaning.
⑤ Feature
1). It made by certified stainless steel 304 .
2). It adopts scientific pressure maintaining and cooling method.
3). It can achieve rapid cooling, sub-cooling and cone cooling.
4). With titanium rod for carbonation.
5). The insulation layer material is high-grade polyurethane with a thickness of 100mm.
6). Polishing accuracy up to Ra0.4μ m .
7). Strict tank pressure test.
8). Energy conservation and pollution emissions.
