Boben Factory Introduction:
Boben Light Industry is the professional manufacturer of distilling equipment and brewing equipment from China, more than 80% products are export to all over the world!
We provide Vodka, Gin, Run, Whisky, Brandy SYSTEM SOLUTIONS. Our company is the leading company of still equipment,wine distillery equipment in China, with the strength of providing vodka, gin, run, whisky, brandy, wine making machines. Specializing in the production of distillation equipment and beer equipment, etc.
At Boben Light Industry we pride oueselves by providing the highest standard of service through taking responsibility for the impact of our business customs, suppliers, employees, cummunities as well as the environment.
Boben Light Industry Machinery Equipment DISTILLERY & BREWERY EXPERT
Providing professional distillation and beer equipment production plant
Professional Leading Shanghai Boben Light Industry.
We are specialized in the turn-key customs designing, production, installation of Distillation & brewing industry. Leading Distilling Equipment Manufacturer, have custom fabricated several cases complete whisky production line turnkey system to worked with many world wide distisilleries/breweries.
Components of Boben Wine Distillery Equipment:
Usage:
It will produce great Whiskey, Brandy, Rum, Gin, Vodka, Grappa and everything in between.
Classification of wine distillery equipment:
(1) Heating method - mainly electric heating or steam heating,gas heating. Wine Distillery stills are heated at the bottom, usually by injection of steam, or through a heat exchanger driven by steam, called a "reboiler".
(2) Ways to promote backflow - three ways. One, some stills are equipped with overhead condensers. Second, in some stills, the alcohol solution will pass through the pipes between the rectifying plates to achieve the effect of preheating. Third, some distillers will pour the spirits they have already obtained back into their stills to promote reflux.
(3) Dephlagmator and Condenser - Continuous distillation consists of two stages similar to batch wine distillation. First, the volatile fraction is separated from most of the water and non-volatiles. The volatile fraction is then rectified. Typically, each stage is carried out in their respective towers. The first stage takes place in a column called a "dephlagmator" and the second stage is called a "rectifier". This can also be done in a huge single column, just imagine a rectifier placed above a separator.
Components:
The Still comes with one Copper Head on the Boiler,
4 Bubble Plate Whiskey Column and one 16 Bubble Plate Vodka Column.
The individual Plate Drain Valves in the 4 Plate Copper Whiskey and the 16 Plate Vodka Column can be opened or closed allowing for better control of flavor profiles and proof.
The Dephlegmators at the top of the Whiskey Column and Vodka Column are used to control proof.
The Vodka Column has 16 bubble plates and a Dephlegmator in the top.
With the Vodka Column on line this still will produce 190 proof Vodka in one run.
For best results a stripping run should be done using only the Scotch Column.
Then the Vodka Run should be done with the low wines from the stripping run.
The 4 plate Whiskey Column will produce up to 160 proof in one run.
If you want to do a stripping run, you bypass the Whiskey Column and the Vodka Column with the two bypass valves, or if you are doing a Vodka, you simply run the vapor through all three columns.
Wine Distillery Equipment Classifiation:
Brewery, Winery, & Distillery Equipment Types
● Mash Tun/Mash Tub
● Dump Troughs
● Beer Wells
● Stills including Wine Distillery Equipment
● Filtration Equipment
● Receiving Tanks
● Fermentation Tanks
● Heat Exchangers
● Pumps
● Thermometers
● Water Storage Tanks
● Spirit Storage Tanks
● Tri-Clamp Fittings & Tubing
Wine Distillery Equipment are mostly distilled from grains such as sorghum, corn, rye or wheat, and are made through mashing - fermentation - distillation - filtration - dilution - blending.
Product material for making Wine Distillery Equipment: T2 copper + SUS304.
The wine distillation equipment produced by our Boben factory, the contact parts of wine liquid and wine vapor are all made of T2 copper material, which ensures the full contact between wine and copper. T2 copper is made from the source manufacturer of China copper raw material, quality assurance, to ensure the superior performance of the material, the whiskey, gin, vodka, brandy and other distilled spirits produced by the distillation equipment have a mellow taste and full aroma.
Why Choose Boben Wne Distilling Equipment?
Advantages of Boben factory:
1.All materials are sanitary stainless steels and red copper CU.
2. Humanized structure design and easy to operate.
3. Transition area of interior wall on tank adopts arc transition to ensure that no dead ends of sanitation.
4.The vodka distillery pot capacity are 100L, 150L,200L,300L, 500L,1000L, 2000L, 3000L,4000L,5000L,6000L. Ect. suggested to put inside copper material.
5.Technical and manufacturing personnel advantages: The company has more than 10 years of experience in copper distillation equipment technology and professional welding personnel, as well as advanced basic equipment.
FAQ
Q1: Where are the main markets for your products?
A: We hope to make business with companies from all over the world. And for now, our Distiller have been exported to especially in North America, South America, Australia, New Zealand, South Asia, Europe and Middle East.
Q2: Can you print our Logo on the equipment?
A:Yes, we can totally produce products according to your this kind special request, even manufacture it based on your drawing.
Q3: What is your lead time?
A:It's around 30 days normally. If we have the products in stock, it will be about 15days
Q4: How can I check your factory situation while it's difficult for me to come to China?
A:We have photos and videos on our website and facebook, It shows every step of the manufacturing.
Q5: How long is the quality guarantee period?
A:We supply 12 months for quality guarantee according to customers' using frequency
Q6: What is your payment term?
A:1. T/T transfer, 50% advance payment for start production, after paying 50% balance payment for shipping.
