① Introduction
This equipment is mainly used in storing material used in food, medicine, chemical industries and it is indispensable storage equipment for them. You can have it made by SUS304, S.S.316L, stainless steel or Q235B carbon steel. It is reasonably designedm produced by advanced technology and confirm to GMP requirement.
The inner surface of the tank can be mirror polished and the roughness can meet as high as RA <=0.8um. The outer surface is polished as follows: the cover and the bottom will be mirror polished and the remaining part will be mat polished. All the polish meet international standard.
② Feature:
Material: SUS304 or S.S.316L
Agitator type: Anchor, frame, or paddle type. ( can be customerized).
Mixing structure: cycloid pin wheel reducer or stepless reducer
Sealing device: mechnical sealing or dual-face water cooled sealing
Heating way: electric heating,steam heating
Volume: can be made as per customer requirements, volume can be made from 50L to max.500000L.
Measure: can be made as per customer requirements.
Main technical parameter of Stirring Form
③ Advantage:
Stainless steel mixing tank could be used in food, beverage, pharmacy, chemical industry,wine and alcohol etc industries.
The inside surface finish of stainless steel mixing tank is Mirror polished, Ra<0.4um.
The welding are polished to ground smooth. There are various agitator options of stainless steel mixing tank: impeller type, Anchor type, Turbine type, High shear mixer,magnetic mixer. The mixing tank could be made with or without jacket. stainless steel food grade mixing tank could be made with or without jacket. Jacket type including full jacket, Dimple jacket,Heating coils. Heating and cooling type including steam heating and electric heating.
④ Application
Stainless steel mixing tanks are widely applied in the beverage, food, dairy, pharmaceutical, chemical and process industries used as blender tank, buffer tank and storage tank, which cleanable to sanitary standards .
⑤ Production
1. Welding: We abandoned the argon gas cylinder but adopt The Central System of Argon to make sure the TIG welding with pure argon gas shield. We also increase the using amount of gas when welding, so the quality of the welding line is more higher.
2.Dimpling: We adopt dimple plate rather than belt for glycol jacket, since it can increase the cooling area and improve the speed of cooling. The most important thing in brewing process is to avoid contaminating, that is to say the most important thing in producing beer equipment is to polish the inside tanks to 0.4~0.6 μm Without dead corner.
3.Polishing: We use large-scale polishing equipment to polish the inside of the tanks -- all over the wall to make sure there is no dead corner. And we adopted passivation and acid pickling which will make our tanks with higher accuracy. You need not worry about there will be some bacterias remained after cleaning.
⑥ Advantages
The advantages of the uniquely designed heaters connection:
1. Easy to install the heaters, no need special loading and unloading tools.
2. The heaters are completely filled into the tank body, ensuring a high heating efficiency. 3. Greatly reduce the cost of use and save energy.
