Still Pot
Volume: working volume 1750L, total volume approximately 2200L
Material: TP2 copper & SUS304
Style: three-layer structure, using steam interlayer heating
Inner tank: copper
Interlayer: stainless steel
Outer cover: stainless steel
Insulation layer: 75mm
Wall thickness:
Inner tank: 4mm
Interlayer: 4mm
Outer shell: 2mm
Other configurations:
Pot top: φ400mm full-view mirror marble, bimetal dial thermometer
Explosion-proof stirring device (with ATEX certification)
Safety exhaust device
Clearing ball
Temperature sensor
Pot bottom: equipped with 200 diameter marble turn the 2-inch quick-install ball valve outlet
The correcting flange is made of brass
The outer surface of the copper parts is treated with anti-oxidation coating
Lartem Type Copper Cone Head
Material: TP2 copper
Configuration:
Clearing ball
Brass flange correction
Observation mirror
Wall thickness: 3mm
The outer surface of the copper treated with anti-oxidation coating
Lyne Arm
Material: TP2 copper
Wall thickness: 3mm
Description:
Using flange correction
The turn arm and the copper cone head are installed horizontally
The outer surface of the copper is treated with anti-oxidation coating
Relux Column
Material: TP2 copper
Wall thickness: 3mm
Configuration:
8-layer distillation tower with 6 observation mirrors
Each tower plate is equipped with copper water caps and clearing balls
The column is equipped with a lever relux device
Top is equipped with a thermometer and an integral flange correction (French method, blue material is brass)
The outer surface of the copper is treated with anti-oxidation coating
Column Fixed Seat
Material: SUS304
Wall thickness: 3mm
Configuration:
Observation mirror
Side alcohol correction port
Clearing ball
Integral flange correction (flange material is stainless steel)
Dephagmator
Material: TP2 copper
Side shell and tube type (column type), internal copper tubes
Wall thickness:
Outer shell thickness: 3mm
Internal tube thickness: 1.5mm
Description:
The top cover is equipped with a correction port, a thermometer, and a quick-install cooling water inlet and outlet
The correcting flange is brass flange, and the top cover flange is stainless steel
Condenser
Material: TP2 copper & SUS304
Side shell and tube type (column type), internal copper tubes
Wall thickness:
Outer shell thickness: 3mm
Internal tube thickness: 1.5mm
Description:
The shell side is used to pass the wire vapor
The pipe side is passed to the cooling water
The cooling water inlet is a quick installation interface
The correcting flange is brass flange
The upper top cover and lower end cover are made of stainless steel with stainless steel flange correction
The outer surface of the copper is treated with anti-oxidation coating
Support Frame
Material: SUS304 stainless steel
Function: used to support and fix the lower and condenser
Spirit Safe
Material: brass & organic glass
Side open-top type, easy to observe the wire discharging condition
Configuration: stainless steel valves and pipes
The outer material of the box is brass
Square Alcohol Collection Tank (heads, wire hearts, tails)
Material: SUS304
Wall thickness: 3mm
Volume: 1000L
Description:
The square design is used to collect the low-alcohol after wash distillation
Collects the head and tail of the alcohol after distilling
Equipped with:
Liquid level gauge
Bottom wire outlet valve
Bottom lid opening and exhaust valve
Each tank is equipped with a high liquid level sensor
Stainless Steel Operating Platform
Material: SUS304
CIP Clearing Pump and Pipeline Valve Correction
Stainless steel sanitary centrifugal explosion-proof pump, tri-clamp inlet and outlet connection
Power: 0.75KW
Flow: 37/1
Head: 16 meters
Used for CIP clearing of circulation pumps of various parts of the distillery
Added Steam/Cooling Valves
Added additional steam/cooling valves to 1750L Still
atex Pumps
Atex pumps 1.5KW, 24 meters head, 37/1 flow rate: 2900RPM
One for heads, tails, and one is for hearts
